PRODUCT

Product introduction

ALMINE 's product development policy is to challenge the unknown.
Instead of getting weighed down by theory, we looked directly at the problem and recognized the need for technology that balances quality and cost.
We then focused our attention on studying the continuous cast rolling method in greater depth.
We also realized that we need not limit our thinking to aluminium alone, but should seek answers outside that framework.
ALMINE's product development program, which is one of the best in the world, is already advancing into uncharted territory. 

Products to be handled

We are able to manufacture all kinds of materials from 1000 series to 7000 series.

These are special alloys or the materials used to produce safety- critical components, which need strict quality.
例:2017 / 2024 / 3003 / 4047 / 6056 / 7075 他

Wire rod (alignment rolling)

Wire rod (alignment rolling)

Size Internal diameter/
External diameter/
Width(mm)
Single weight
9.5 〜 35Φ
Internal diameter  :
750
External diameter :
1,450
Width :
950
2,000kg
Internal diameter  :
750
External diameter :
1,100
Width :
950
1,000kg
Coil style

Coil style

Size Internal diameter/
External diameter(mm)
Single weight
0.1〜1.8Φ
Internal diameter  :
280
External diameter :
450
MAX 20kg
1.3〜3.0Φ
Internal diameter  :
320
External diameter :
600
MAX 40kg
1.9〜6.5Φ
Internal diameter  :
450
External diameter :
700
MAX 50kg
6.4〜25Φ
Internal diameter  :

 ①600

 ②850

External diameter :

 ①1,100

 ②1,300

①50〜200kg
②MAX 300kg
22〜30Φ
Internal diameter  :
800〜1,000
External diameter :
1,100〜1,400
MAX 500kg
7.0〜30Φ
Internal diameter  :
750
External diameter :
1,450
Width :
920
1,000〜2,000kg
Carrier style

Carrier style

Size Internal diameter/
External diameter(mm)
Single weight
0.5〜1.8Φ
Internal diameter  :
260
External diameter :
450
MAX 80kg
1.3〜3.0Φ
Internal diameter  :
320
External diameter :
600
MAX 200kg
1.9〜6.5Φ
Internal diameter  :
400
External diameter :
700
MAX 200kg
6.4〜25Φ
Internal diameter  :

 ①600

 ②850

External diameter :

 ①1,100

 ②1,300

①②MAX 500kg
22〜30Φ
Internal diameter  :
1,100
External diameter :
1,200
MAX 500kg
Bobbin style

Bobbin style

Quality of the material Size Single weight
For thermal spray・aluminum
wire for vapor deposition
99.99%AL
99.90%AL
99.70%AL
AL-MG 5%
Others
0.1~4.0Φ 1~30kg
Fiber drum making wire

Fiber drum making wire

Size Internal diameter/
External diameter(mm)
Single weight
0.1〜1.8Φ
Internal diameter  :
220
External diameter :
430
MAX 60kg
1.3〜3.0Φ
Internal diameter  :
320
External diameter :
600
MAX 100kg
1.9〜6.5Φ
Internal diameter  :
400
External diameter :
620
MAX 150kg
Bars

Bars

Size
1.0〜35Φ × MAX 4,000L
Sheet

Sheet

Size
0.1〜4.0T × MAX 1,040W × MAX 4,000L
Coil

Coil

Size Internal diameter/
External diameter/
Width(mm)
Single weight
0.1〜4.0T ×
MAX1,040W ×
Coil
Internal diameter  :
300〜508Φ
External diameter :
MAX 1,585
Width :
MAX 1,040
MAX 5,000kg

New product information

Large diameters coil  with 7000 series
(Ultra duralumin)

Up to now, we have been producing the thick diameters only in bar but we also succeeded in coil with 7000 series.
By unique Continuous Casting and Rolling method we are producing seamless wires up to diameters of 35mm, which are no defect and high quality coils with state-of-the-art technology.

Maximum weight : 2 metric tons
Use: automotive parts, aircraft parts and the others.

FK35 Al-Fe alloy
 

Features far better elongation and processing capability than conventional pure aluminium.

Product development

It succeeds in making of the crystal grain of the metallographic structure super-minute.


Almine succeeds in making the crystal grain of the metallographic structure super-minute in the continuous casting rolling method of the research and the company's in-house development.
The inside of a metallic organization is the segregation, and is also steady by a material that is more uniform than any process of manufacture of the other companies.
There is neither stress crack nor a stress distortion, too. It cuts, forges, and is preeminent.

As for the performance of the aluminum product, the uniformity of the metallographic structure is the most important.
The crack and bending occur if the remaining stress remains in a metallic organization where do the segregation of the alloy element,and it processes it, and it is likely to make trouble due to the secular distortion at times.
The material it is continuous and without a uniform organization and the segregation is made by the research and development in Almine.